WARING BLENDER 7012S
The products of WARING Products, Inc. are widespread to all over the world.
Especially in the laboratory field, they provide various crushing containers that are suitable for WARING
BLENDER to crush from mass processing to a small amount processing (for dry samples, from a small
amount processing to a very small amount processing). WARING Products, Inc. is the manufacturer that
get ready the crushing containers suitable for crushing samples.
- This blender equips with 700W 1HP motor.
The performance is same as 7011HS.
- The biggest difference is that 7012S type can
change the speed at seven steps. When crushing
the sample to fine particle, the speed with
various steps of 3,100-20,000rpm can process
the sample to fine particle rapidly and finely with
- In addition, you can use the low-speed rotation
when you want the mixture of the sample or
want to crush the sample without finishing to
crush the organization of the sample.
Sorry Japanese only.
You can download Acrobat Reader here.
|Power source||100V, 50/60Hz|
|Rotational speed(rpm)|| 3,100  3,400  6,800  8,400|
| 13,000  15,600  20,000|
|Dimensions||190 x 200 x 365mm|
|Accessories||1000mL SUS container|
|Use model||7011HS(same performance with 7012S)|
|over 48 mesh||4.5g||18g||24g||87g|
|through 48 mesh||4.5g||9g||12g||12g|
Testing to crush soybeans with the four kinds of stainless containers that the capacity was different. The crush operating condition is in 30 seconds at high-speed and in 30 seconds at low-speed. It is the total for 60 seconds. We sorted out the one that passed through the sieve of 48 mesh (about 300μm) and the one that doesn’t pass through it.
|This blender has same performance with 7011HS, but has 180 sec timer.||
|This blender has same performance with 7012S, but has two steps speed.|
※All prices are indicated excluding tax.